Low Noise Compact Type Hydraulic System

• Customization: Available
• Certification: CE, ISO9001
• Pressure: High Pressure
• Model NO.: YA series hydraulic system
• Work Temperature: Normal Temperature
• Voltage: 380V
• Installation: Horizontal
• Material: Cast Steel
• Max.Pressure: 31.5MPa
• Hydraulic Fluid: Hydraulic Oil
• Transport Package: Wooden Case
• Specification: YA10, 16, 22, 27
• Trademark: Seric
• Origin: Guangzhou
• HS Code: 8412299090
• Production Capacity: 5000

Product Description

we can supply standard and non-standard hydraulic hydraulic system according to your need,following is standard some information.
1.These are compact-sized and lightweight power packages that use minimal oil delivered from a small tank.
2.They come with a high-performance variable displacement vane pump and piston pump installed.
3.Since a manifold block can be installed directly on the hydraulic pump as an option, it is easy to configure the hydraulic circuit of the user's choice by installing a small stack valve.
4.Full return line filter is standard equipment which enables longer system life.
5.Variety of options are available,including temperature gauge,magnet,level switch,manifold block,etc.
Technical Date

Model	Geometric displacement cm3/rew	Max.Pressure Mpa	Pressure adjustment range Mpa	Oil tank capacity L	Power Of Electric Motor KW	Weight KG
YA10-B-2-0.75-41	10.0	7	1.2~7	20	0.75KW×4P	55
YA10-B-3-0.75-41				30	0.75KW×4P	60
YA10-B-3-1.5-41				30	1.5KW×4P	65
YA10-B-4-0.75-41				40	0.75KW×4P	80
YA10-B-4-1.5-41				40	1.5KW×4P	85
YA10-B-6-1.5-41				60	1.5KW×4P	90
YA10-B-6-2.2-41				60	2.2KW×4P	90
YA10-C-6-2.2-41		16	2.0~16	60	2.2KW×4P	90
YA10-C-6-3.7-41				60	3.7KW×4P	95
YA10-C-10-2.2-41				100	2.2KW×4P	125
YA10-C-10-3.7-41				100	3.7KW×4P	130
YA16-B-4-1.5-41	15.8	7	1.2~7	40	1.5KW×4P	90
YA16-B-6-1.5-41				60		95
YA16-B-6-2.2-41				60	2.2KW×4P	95
YA16-B-6-3.7-41				60	3.7KW×4P	100
YA16-C-6-3.7-41		16	2.0~16	60		100
YA16-B-10-2.2-41		7	1.2~7	100	2.2KW×4P	130
YA16-C-10-3.7-41		16	2.0~16	100	3.7KW×4P	135
YA16-C-10-5.5-41				100	5.5KW×4P	150
YA16-C-10-7.5-41				100	7.5KW×4P	160
YA22-B-6-2.2-41	22.2	7	1.2~7	60	2.2KW×4P	95
YA22-B-6-3.7-41				60	3.7KW×4P	100
YA22-B-10-2.2-41				100	2.2KW×4P	130
YA22-B-10-3.7-41				100	3.7KW×4P	135
YA22-C-10-5.5-41		16	2.0~16	100	5.5KW×4P	150
YA22-C-10-7.5-41				100	7.5KW×4P	160
YA37-B-10-3.7-41	36.9	7	1.2~7	100	3.7KW×4P	135
YA37-B-16-5.5-41				160	5.5KW×4P	170
YA37-B-16-7.5-41				160	7.5KW×4P	170

.Air Bleed
• During initial system startup (and startups after long period of storage), pump may have difficulty drawing fluid. By pre-installing an air bleed valve (ABT-03) or by loosing a fitting in the delivery pipe, air can be bled from the system.
• During air bleed of pump and piping, pump should be run at no load.
.Warm Up
During startup, if viscosity is higher than proper viscosity (54 mm 2 /s), system should be warmed up with pressure less than half of maximum working pressure until viscosity falls below 54 mm 2 /s.
. Hydraulic Fluids
• Maximum operating pressures, maximum speeds,etc. specifications may differ according to the hydraulic fluid used.
• Mineral oils
-Please use general industrial use anti-wear fluids.
• Fire resistant fluids
-Water glycols may be used with us standard type pumps. However maximum operating pressures, maximum speeds, etc., specifications will differ from those of mineral oil fluids. Please refer to specifications of each pump for details.
-Fluorine seals are used with pumps that operate on phosphate ester fluids. An "F3-" suffix
is used to designate such pumps. However specifications for maximum operating pressures, maximum speeds, etc., will differ from those of mineral oil fluids.
Hydraulic Fluid Viscosity and Temperature
• Please operate pump with viscosity level within 13~54 mm 2 /s range. Maximum viscosity allowed is 860 mm2/s (220 mm 2 /s for V20, V30 Series), but warm up and operation should be done in accordance with the paragraph on "Warm Up".
• Fluid temperature should be maintained below 65°C.